10-90mm Inner Diameter Angular Contact Ball Bearing

Model NO.: 10-90mm


The Number of Rows: Single


Material: Bearing Steel


Load Direction: Axial Bearing


Seals Type: Seal


Transport Package: Single Box+Cartons+Pallets


Origin: China




Rolling Body: Ball Bearings


Outer Dimension: Small and Medium-Sized (60-115mm)


Spherical: Non-Aligning Bearings


Separated: Unseparated


Trademark: ZGXSY


Specification: id10-90MM


HS Code: 84822000


Angular Contact Ball Bearings are particularly suitable for carrying combined (axial and radial) loads. Sometimes, they also can carry pure axial load and operate in higher speed. Under radial load, axial component force will be produced which must be counteracted. So the bearings are normally adjust against a second bearing.

Since these bearing have a contact angle, they can sustain significant axial loads in one direction together with radial loads. Because of their design, when a radial load is applied, an axial force component is produced; therefore, two opposed bearings or a combination of more than two must be used.



Parameter

size			Model	Basis Load ratings		Limited Speed
				Dynamic	Static	Grease	Oil
10	26	12	3000	5.5	3.2	18000	23000
	26	12	3000-2RS	5.5	3.2	18000
	26	12	3000-2Z	5.5	3.2	18000
12	28	12	3001	6.1	3.7	17000	22000
	28	12	3001-2RS	6.1	3.7	17000
	28	12	3001-2Z	6.1	3.7	17000
15	32	13	3002	8.5	5.4	14500	18000
	32	13	3002-2RS	8.5	5.4	14500
	32	13	3002-2RS	8.5	5.4	14500
17	35	14	3003	9	6	12500	16000
	35	14	3003-2RS	9	6	12500
	35	14	3003-2Z	9	6	12500
20	32	10	3804	4.9	3.9	13000	14300
	32	10	3804-2RS	4.9	3.9	13000
	32	10	3804-2Z	4.9	3.9	13000
	37	13	3904	9.3	6.6	12000	13200
	37	13	3904-2RS	9.3	6.6	12000
	37	13	3904-2Z	9.3	6.6	12000
20	42	16	3004	14.2	9.6	11000	13000
	42	16	3004-2RS	14.2	9.6	11000
	42	16	3004-2Z	14.2	9.6	11000
	47	21	3204	19	12.1	8000	12000
25	37	10	3805	5.5	4.9	11500	12700
	37	10	3805-2RS	5.5	4.9	11500
	37	10	3805-2Z	5.5	4.9	11500
	42	13	3905	9.6	7.5	11000	12300
	42	13	3905-2RS	9.6	7.5	11000
	42	13	3905-2Z	9.6	7.5	11000
	47	16	3005	15.2	11	9500	12000
	47	16	3005-2RS	15.2	11	9500
	47	16	3005-2Z	15.2	11	9500
30	42	10	3806	5.7	5.6	10000	11500
	42	10	3806-2RS	5.7	5.6	10000
	42	10	3806-2Z	5.7	5.6	10000
	47	13	3906	9.9	8.3	9500	10500
	47	13	3906-2RS	9.9	8.3	9500
	47	13	3906-2Z	9.9	8.3	9500
	55	19	3006	20.3	15.5	8000	10000
	55	19	3006-2RS	20.3	15.5	8000
	55	19	3006-2Z	20.3	15.5	8000
35	47	10	3807	6.1	6.2	8500	10000
	47	10	3807-2RS	6.1	6.2	8500
	47	10	3807-2Z	6.1	6.2	8500
	55	15	3907	12.9	11.3	8000	9500
	55	15	3907-2RS	12.9	11.3	8000
	55	15	3907-2Z	12.9	11.3	8000
	62	20	3007	24.2	20.4	6500	8500
	62	20	3007-2RS	24.2	20.4	6500
	62	20	3007-2Z	24.2	20.4	6500
40	52	10	3808	6.4	6.9	7000	8500
	52	10	3808-2RS	6.4	6.9	7000
	52	10	3808-2Z	6.4	6.9	7000
	62	16	3908	17.4	15.8	6500	8000
	62	16	3908-2RS	17.4	15.8	6500
	62	16	3908-2Z	17.4	15.8	6500
	68	21	3008	24.5	20.8	6000	7800
	68	21	3008-2RS	24.5	20.8	6000
	68	21	3008-2Z	24.5	20.8	6000
45	58	10	3809	6.7	7.7	6300	7000
	58	10	3809-2RS	6.7	7.7	6300
	58	10	3809-2Z	6.7	7.7	6300
	68	16	3909	17.9	17.2	6000	6800
	68	16	3909-2RS	17.9	17.2	6000
	68	16	3909-2Z	17.9	17.2	6000
	75	23	3009	39.3	36.4	5600	6200
	75	23	3009-2RS	39.3	36.4	5600
	75	23	3009-2Z	39.3	36.4	5600
50	65	12	3810	7	8.4	6000	7500
	65	12	3810-2RS	7	8.4	6000
	65	12	3810-2Z	7	8.4	6000
	72	16	3910	19.1	19.6	5800	7200
	72	16	3910-2RS	19.1	19.6	5800
	72	16	3910-2Z	19.1	19.6	5800
	80	23	3010	42.3	41.9	5300	6600
	80	23	3010-2RS	42.3	41.9	5300
	80	23	3010-2Z	42.3	41.9	5300
55	72	13	3811	12.8	14.4	5500	6500
	72	13	3811-2RS	12.8	14.4	5500
	72	13	3811-2Z	12.8	14.4	5500
	80	19	3911	20	21.7	5300	6200
	80	19	3911-2RS	20	21.7	5300
	80	19	3911-2Z	20	21.7	5300
	90	26	3011	43.7	44.7	4800	5800
	90	26	3011-2RS	43.7	44.7	4800
	90	26	3011-2Z	43.7	44.7	4800
60	78	14	3812	13.6	16.2	5000	5500
	78	14	3812-2RS	13.6	16.2	5000
	78	14	3812-2Z	13.6	16.2	5000
	85	19	3912	21	23.8	4800	5300
	85	19	3912-2RS	21	23.8	4800
	85	19	3912-2Z	21	23.8	4800
	95	26	3012	47.2	53.4	4400	5000
	95	26	3012-2RS	47.2	53.4	4400
	95	26	3012-2Z	47.2	53.4	4400
65	85	15	3813	15.1	18.3	4700	5200
	85	15	3813-2RS	15.1	18.3	4700
	85	15	3813-2Z	15.1	18.3	4700
	90	19	3913	21.4	24.8	4500	5000
	90	19	3913-2RS	21.4	24.8	4500
	90	19	3913-2Z	21.4	24.8	4500
	100	26	3013	49.5	59.2	4000	4800
	100	26	3013-2RS	49.5	59.2	4000
	100	26	3013-2Z	49.5	59.2	4000
70	90	15	3814	18	21.9	4400	4800
	90	15	3814-2RS	18	21.9	4400
	90	15	3814-2Z	18	21.9	4400
	100	23	3914	25.8	30	4000	4600
	100	23	3914-2RS	25.8	30	4000
	100	23	3914-2Z	25.8	30	4000
	110	30	3014	54.2	58.9	3600	4400
	110	30	3014-2RS	54.2	58.9	3600
	110	30	3014-2Z	54.2	58.9	3600
75	95	15	3815	16	20.3	4200	4700
	95	15	3815-2RS	16	20.3	4200
	95	15	3815-2Z	16	20.3	4200
	105	23	3915	26	31.3	3800	4300
	105	23	3915-2RS	26	31.3	3800
	105	23	3915-2Z	26	31.3	3800
	115	30	3015	57.7	66.5	3400	4000
	115	30	3015-2RS	57.7	66.5	3400
	115	30	3015-2Z	57.7	66.5	3400
80	100	15	3816	16.5	21.7	4000	4400
	100	15	3816-2RS	16.5	21.7	4000
	100	15	3816-2Z	16.5	21.7	4000
	110	23	3916	26.7	32.5	3500	4000
	110	23	3916-2RS	26.7	32.5	3500
	110	23	3916-2Z	26.7	32.5	3500
	125	34	3016	63.5	67.8	3100	3800
	125	34	3016-2RS	63.5	67.8	3100
	125	34	3016-2Z	63.5	67.8	3100
85	110	19	3817	22	28.7	3600	4000
	110	19	3817-2RS	22	28.7	3600
	110	19	3817-2Z	22	28.7	3600
	120	26	3917	31.5	38.5	3300	3700
	120	26	3917-2RS	31.5	38.5	3300
	120	26	3917-2Z	31.5	38.5	3300
	130	34	3017	68.3	77.5	2900	3600
	130	34	3017-2RS	68.3	77.5	2900
	130	34	3017-2Z	68.3	77.5	2900
90	115	19	3818	23.3	30.8	3300	3600
	115	19	3818-2RS	23.3	30.8	3300
	115	19	3818-2Z	23.3	30.8	3300
	125	26	3918	32.1	40.1	3100	3400
	125	26	3918-2RS	32.1	40.1	3100
	125	26	3918-2Z	32.1	40.1	3100
	140	37	3018	69.8	77.3	2700	3300
	140	37	3018-2RS	69.8	77.3	2700
	140	37	3018-2Z	69.8	77.3	2700

Aout us

Shandong XSY bearing Co., Ltd. is an enterprise majoring in the manufacturing of precision bearings. It has a integrate service chain of research, producing and sales. The bearings with brand trademark of "ZGXSY" win good quality reputation in domestic bearing market. The company is equipped with modern production facilities and advanced testing instruments, mainly specific to imported top-range products. We professionally produce precise bearings such as Spherical Roller Bearings, thrust ball bearings, Deep Groove Ball Bearings, Cylindrical Roller Bearings, Tapered Roller Bearings, thrust spherical roller bearings and so on. The productions are widely used as auxiliary products in metallurgy, electrical machine, mine, petroleum, chemical, coal, cement, paper making, wind electricity, heavy machinery, engineering machinery, port machinery and other industries.



Testing

All our products are tested sctrictly before delivery. The testing process is: Dimension Measurement-Waviness, roundness and form analysis-Noise and vibration testing-Noise and vibration testing-Non destructive testing-Grease testing machines.



Packaging & Shipments

Packaging Details:

1.tube /plastic bag+box+cartons+pallets

2.plastic bag+single box+cartons+pallets

3.industrial packing+cartons+pallets

Delivery Details:

Less than 1000PCS, deliver within 5 days by Express or Airplane.

More than 1000PCS, deliver within 15 days by sea.



FAQ

1. Are you a factory or a trading company?

Shandong XSY Bearing Co., Ltd. is a professional manufacture of deep groove ball bearings and other bearings.

2. Is OEM available?

Yes, OEM is available. We have professional designer to help your brand promotion.

3. Is the sample available?

Yes, samples are available for you to test the quality.

4. Have the products been tested before shipping?

Yes, all of our bearings have been tested before delivery.

5. How long is your delivery time?

As mentioned above, there are different types of shipping for your order. We make sure to deliver goods once all products are produced and tested.

6. What is your terms of payment ?

You can pay by T/T, L/C, Westunion, Paypal,etc., and it can be negotiated according to different orders with different amount.

7. Can we visit your factory ?

Sure. Welcome to XSY Bearing Co., Ltd. and offer your kind guidance.

Contact us if you need more details on Angular Contact Ball Bearing. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Ball bearing、Medium Bearing. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Angular Contact Ball Bearings